Ref: B7-T-1.24W

Collecteur tournant 7 pistes à arbre creux pour test automobile - diametre 31,5mm - etanche

Collecteur tournant tubulaire - 7 pistes
Ideal for automotive half shaft torque measurements
Mounts on shafts up to 1.24” (31,5 mm) in diameter
Rugged stainless steel construction
Permanently lubricated bearings
Instrumentation quality rings and brushes
weatherproof
Operating temperature : -40 to 121°C
option 60 ppr encoder

Présentation du collecteur tournant B7-1.24W

Michigan Scientific’s B7-1.24W Weatherproof Slip Ring Assembly is ideal for applications that require a slip ring to be mounted directly on a rotating shaft. The B7-1.24W provides 7 circuit connections, and was designed to make long-term, all-weather (not submersible), torque measurements on automotive half shafts, but can be used in other applications with a shaft up to 1.24” (31,5 mm) in diameter.

The slip ring sealing system protects against water spray, grit, dust, mud, slush, and snow.

Connections to strain gages, thermocouples, and other sensors are made via color-coded solder terminals located on the slip ring rotor. Each slip ring assembly includes a 5m stator cable with a protective rubber boot for the connector at the slip ring.

Options

Stator connection

Soldering terminal or LEMO connector

60 ppr Encoder (Model B7-1.24W/E60)

The encoder included in the B7-T-1.24W/E60 Tubular Slip Ring produces a 60 pulse/revolution 5-volt square wave. The TTL compatible signal is produced by a hall-effect sensor, which allows speed to be determined down to 0 mph. The voltage required to drive the encoder can range from 5.5 to 45 DC volts.